Home

Single Acting Press Registration Lock-Up, CML-SA

Manuals

User Manuals
Print versionPrint version

The CML Single Acting Lock is available for presses with a lead edge and for cylinders that require a false-lead edges. The CML-SA uses a mechanical assist for plate installations and for presses running in a single direction.

Key Benefits:

  • A high-profile register pin aids in quick and accurate plate installations
  • Heavy-duty torsion springs provide strong positive plate locking with proper registration
  • Air hose and periodic light lubrication is the only maintenance required
  • Reduced angle ends aid in preventing marking due to stress bends
  • False-lead edge can be set high or low on the press registration
  • This lock is capable of meeting any web width. Custom sizes and multiple web widths available

Typical Press Application:
Goss Community - one around, single width wide gap press. Goss Community - one around, single width narrow gap (lead edge) press. Goss Suburban - one around, single width press. Goss Urbanite - two around, single width press. Harris 800 series - two around, single width press. Harris 1600 and 1700 - two around, double width press.

Plate Up Procedure:
The plate lead bend is installed over the lock false-lead edge. The cocking tool opens the spring-loaded pin bar. The trail-edge bend mounts over the pin bar. Once the plate is positively registered the pin bar mechanically locks the trail into place.