Software Downloads

Equipment Software

Please note that software and configuration file are installed from the factory and need not be installed except for upgrade purposes.

Follow this link to find software which is valid for all equipment.
The package includes all needed software files and the instruction describing the installation procedure.

Print and read the instruction before initiating the installation procedure.

i-Postion

 Imposing solutions for PlateWriter - iCtP

Free 25-day trial version exclusively from
Glunz & Jensen! (80 MB)

Specifically designed for PDF or PS workflows, i-Position includes comprehensive imposing tools for CtP users enabling automated booklet and magazine creation through the process of modifying position, orientation and printing order of individual pages within a document for a specific printing press or binding requirement.

i-Position will also step and repeat smaller jobs allowing maximum use of press sheets and reduced time on press. i-Position delivers an imposition solution that is everything you need for all you can imagine. 

Remote Enabling System

  GNUC-1 CtP processors:

  GNUC-2 CtP processors:

Free 3-months trial versions exclusively from
Glunz & Jensen!

Read more about the Remote Enabling System

If your equipment is delivered without a license code, please e-mail callcenter@glunz-jensen.com with information of the equipment serial number. Callcenter will then provide you with a free 3 month license code.

System requirements:
The download versions cover all windows versions when installed as recommended below.
Other system requirements, please see the Installation Manual (also included with the software).

Installation procedure GNUC-1 and GNUC-2:
Select the appropriate package, GNUC-1 or GNUC-2.
Download and un-zip the file to a separate folder on your PC or laptop harddisk.
NOTE! The software packages are encrypted zip files. To unlock the zip files use password 'software'.

NOTE! If you experience error messages in the attempt to unzip the software package, please follow the workaround described here.

GNUC-1 (22.5 MB)
To access the Remote Server please activate the 'GrGwWin.exe' stored in the folder:
'Remote Enabling GNUC1/GrGwWin Copy Install'.
And to access the Remote Client, please activate the 'grclient.exe' stored in the folder:
'Remote Enabling GNUC1/GrClient Copy Install/GrClient'.
Tip! Copy a shortcut of the 'GrGwWin.exe' and 'grclient.exe' to the PC's desktop for easy access to the Remote Server and Remote Client.

GNUC-2 (18.9 MB)
To access the Remote Client, please activate the 'grclient.exe' stored in the folder:
'Remote Enabling GNUC2/GrClient Copy Install/GrClient'.
Tip! Copy a shortcut of the 'grclient.exe' to the PC's desktop for easy access to the Remote Client.

USB driver software for HyperTerminal

Free USB driver for Windows
(2.3 MB) (ZIP)

This USB driver software enables a Windows PC to establish communication to the Glunz & Jensen Gecko processors
(not needed for Gecko+ processors).

The driver is required for configuration of the Gecko processors using the standard HyperTerminal application which is included with Microsoft Windows operating system.